2006 Toyota Tundra Rear Door Check

Toyota Tundra Check Assembly Rear Door Replacement

Easy DIY Guide

Introduction

In this blog post, we'll provide a step-by-step guide on how to remove and replace the check assembly on the rear door of a 2006 Toyota Tundra. This repair is relatively simple and can be completed in under an hour with basic tools. To access the check assembly, you will need to remove the rear door panel. Although removing the door panel can be daunting, this guide will make it easy for you to do in no time.

Tools and Materials You'll Need

• Phillips screwdriver
• Flathead screwdriver
• 10mm socket wrench
• New check assembly

Step-by-Step Instructions

1. Remove the rear door panel.
1. Use a Phillips screwdriver to remove the two screws located at the bottom of the door panel.
2. Use a flathead screwdriver to pry off the plastic cover located behind the door handle.
3. Use a 10mm socket wrench to remove the two bolts located behind the plastic cover.
4. Pull the door panel straight toward you to detach it from the door.
2. Locate the check assembly.
3. The check assembly is located on the inside of the door, near the top.
4. Remove the old check assembly.
1. Use a Phillips screwdriver to remove the two screws that secure the check assembly.
2. Disconnect the electrical connector from the check assembly.
3. Remove the check assembly from the door.
5. Install the new check assembly.
1. Connect the electrical connector to the new check assembly.
2. Place the new check assembly into the door.
3. Secure the check assembly with the two screws.
6. Reinstall the rear door panel.
1. Align the door panel with the door and push it into place until it snaps into place.
2. Install the two screws at the bottom of the door panel.
3. Install the plastic cover behind the door handle.
4. Install the two bolts behind the plastic cover.

Conclusion

Replacing the check assembly on a 2006 Toyota Tundra is a simple and straightforward repair that can be completed in under an hour with basic tools. By following the steps outlined in this guide, you can easily fix this issue and restore the proper functioning of your vehicle's door.